Say Goodbye To Power Hungry Neon And Cold Cathode With Light Tape®

A 100m length Light Tape® only uses the same power as a 100w light bulb, that’s why it’s the planets most environmentally friendly display lighting product.

For more information go to: www.lighttape.co.uk

Thin Light Tape

Light Tape® uses less than one tenth of the power and is one third of the price of Neon and Cold Cathode display lighting, it is flexible, easier to install and maintain, reduces light pollution, produces no waste heat or infrared light, is fully recyclable, uses No Gas, No Glass and No Mercury.

Light Tape® with its wealth of benefits, versatility, ease of application, cost effectiveness and extremely low carbon footprint is fast becoming the chosen, viable alternative to more traditional forms of display lighting.
(1 Watt per Meter at 25mm (1”) wide, a 100m length of 25mm wide Light Tape® only uses the same power as a 100w light bulb),

Architecture, Automotive, Advertising, Interior Design, Exhibitions, Events, Marine, Point of Sale, Hotels, Bars, Restaurants, Safety Clothing, Emergency Egress, Health and Safety are just a few of the sectors benefitting from this exciting, innovative light source. Our web site has now been updated including the picture, animation and video galleries. Go to http://www.lighttape.co.uk/?content=movie to see the latest Light Tape®  applications video’s.

Light Tape® s produce an 85~90% energy saving compared to Neon, fluorescent and Cold Cathode display lighting.  The Light Tape®  EL light itself is just 0.5mm thick and with its inherent flexibility can be mounted on any surface and is optionally available with self-adhesive backing tape.

Light Tape®  is the longest and brightest electroluminescent lamp in the world. It can be supplied in a range of colours and widths, in lengths up to 300ft. Driven by specially devised power supplies, it can be used in flashing or steady state modes in indoor or outdoor applications. The design is safe with no mercury, no glass to break or gas to escape and it’s highly energy efficient too. In application, it is easy to install, requiring virtually no maintenance compared to alternative lighting technologies.

A NASA study for the Air Force on Electroluminescent Lighting  showed the technology was easily visible from distances over five miles away. Notably Light Tape®  light penetrates fog, smoke, snow, haze and other normally poor visibility conditions. http://www.lighttape.co.uk/knowledge/USAF%20Electroluminescent%20Lighting%20Study.pdf

What is Light Tape® ?

Light Tape®  is made up of a DuPont electrode coated in a Sylvania phosphor and encapsulated in a Honeywell laminate. Light Tape®  has no glass, no gas, and no mercury/heavy metals and so is user and environment friendly. Light Tape®  provides an 85% – 90% energy saving against other commercially available light sources such as Neon and Cold Cathode and due to its thinness (just 0.5mm thick, as thin as a business card) and being lightweight, affords inherent flexibility of use providing a neater, modern, space saving alterative that is easy to install with little to no maintenance and has a long working life. For further information go to: www.lighttape.co.uk

Development kits for Light Tape®  enabling systems to be easily developed, tried and tested are now available from Light Tape  UK which operates with full sales and marketing capabilities, as well as warehousing to enable fast delivery from stock. Light Tape®  UK will also provide full back-up and support as well as advice and assistance in system design and requirements.

About Light Tape®  UK Limited: Based in Barnsley South Yorkshire Light Tape®  UK Limited is the exclusive distributor for Electro-LuminX products in the UK and Ireland.

For further information please contact:
Mike Hardcastle, Managing Director

Light Tape  UK Ltd.
7 Meadowfield Drive,
Hoyland,
Barnsley,
South Yorkshire.
S74 0QE

Telephone: +44 (0)845 617 0697

Mob: +44 (0) 7899 790 669

email: info@lighttape.co.uk

Advertisements

About mikeltukl
About Light Tape Light Tape UK Ltd have launched a revolutionary, cost-effective slim and flexible electroluminescent lighting strip system that operates from low amperage supplies to provide numerous applications for use in industrial and commercial areas. Uses range from directional strip lighting in fire and safety applications to automotive, architectural and entertainment applications, as well as advertising displays and graphic display light boxes. It can even replace neon signage, notably for graphic display light boxes, where Light Tape enables greatly reduced box thickness to just 12mm, a huge reduction on other commercially available florescent light signage systems, which are 40mm thick. Light tape itself is just 0.5mm thick (as thin as a business card) and lightweight affording inherent flexibility of use and with this and the thinner Light Tape light boxes, the weight of the system is considerably reduced making it easier and safer to handle. Light tape provides an 85% - 90% energy saving against other commercially available florescent light boxes and Light Tape is also the longest and brightest electroluminescent lamp in the world. It can be supplied in a range of colours and widths, with lengths of up to 300ft or more. By varying supply voltage and frequency, the brightness and hue of Light Tape can also be adjusted. Driven by specially devised power supplies, it can be used in flashing or steady state modes in indoor or outdoor applications. The design of this state of the art product is both safe, there is no mercury incorporated in it, no glass to break or gas to escape, and is highly energy efficient too. A 25mm wide by 300ft long Light Tape, consumes less power than a 100W light bulb whilst also being at least twice the brightness of alternative EL technologies. In outdoor illuminated signage applications Light Tape can be seen for miles. A NASA study for the Air Force on Light Tape showed the technology easily visible from distances over five miles away. Notably Light Tape penetrates fog, snow, haze and other normally poor visibility conditions. Light Tape is easy to install, and requires virtually no maintenance compared to alternative lighting technologies and the flat, flexible, plastic lamp generates no heat and can be wrapped around corners." bend radius is just 2mm. And unlike fiber optics, Light Tape loves to be flashed sequentially or selectively which not only enhances applications but also significantly extends life. Multi-channel sequences and flashers are also available for use with Light Tape. Light Tape is the most versatile light bulb ever developed! Patent protected Light Tape is the thinnest, longest and brightest electroluminescent lamp in the World. Light Tape is extremely light, flexible and very easy to install. We offer multiple colors, a variety of widths and lengths of 100m or longer.

2 Responses to Say Goodbye To Power Hungry Neon And Cold Cathode With Light Tape®

  1. Pingback: Light Tape® Health and Safety Applications « Light Tape UK's Blog

  2. Nate Shenk says:

    Wow! Light Tape seems to be amazing!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: