How to make a 90° corner with Light Tape®

How to make a 90° corner with Light Tape® 

Screen Shot 2014-09-09 at 19.29.42

This Video shows the user how to make a 90° corner with Light Tape®

http://www.lighttape.co.uk

 

Advertisements

Why does Light Tape® make a noise?

Screen Shot 2014-09-08 at 14.33.05

Why does Light Tape® make a noise?

http://www.lighttape.co.uk

Light Tape® is a flat, thin, flexible, environmentally friendly alternative to traditional display lighting like neon and cold cathode, using no glass, no gas and no mercury.

Light Tape® is made up of a metal ribbon coated with a Sylvania phosphor, we cut a score line into the ribbon and then encapsulate with a Honeywell Clarus Film, we then connect a cable to each side of the score line. When we connect the Light Tape® to a high frequency power source the Phosphors vibrate and this creates the light.

The action of the phosphors vibrating creates a buzzing noise, this can be reduced by fixing the Light Tape® in place with a double side adhesive or foam adhesive.

Light Tape® FloorGuard Video

shoe on floor guard red light tape

Light Tape® Floor Guard

Light Tape® Floor Guard is a translucent PVC enclosure strip designed to protect floor mounted Light Tape®. 
 
 
Excellent lay flat qualities, blends with any floor covering. Ideal for protecting Light Tape® temporary installations at trade shows and events or edge lighting on stages and catwalks. 
 
Floor Guard can be angle cut to create shapes around area’s, connector wiring can be concealed under the Light Tape® leading back to the Smart Driver power supply. 
 
For heavy traffic area’s, Floor Guard can be fixed in place with double sided adhesive.

 
Available in 2 sizes both up to 9m long. 
The 68mm wide smaller size takes 1/4” (6mm) and 1/2” (12.7mm) lit width Light Tape®. 
The 83mm wide large size takes 1/2” (12.7mm) and 1” (25.4mm) lit width Light Tape®.
 

Light Tape® New Product – Floor Guard

 



Light Tape® Floor Guard

 
Light Tape® Floor Guard is a translucent PVC enclosure strip designed to protect floor mounted Light Tape®. 

 
Excellent lay flat qualities, blends with any floor covering. Ideal for protecting Light Tape® temporary installations at trade shows and events or edge lighting on stages and catwalks. 
 
Floor Guard can be angle cut to create shapes around areas, connector wiring can be concealed under the Light Tape® leading back to the Smart Driver power supply. 
 
For heavy traffic area’s, Floor Guard can be fixed in place with double sided adhesive.

 
Available in 2 sizes both up to 9m long. 
The 68mm wide smaller size takes 1/4 (6mm) and 1/2 (12.7mm) lit width Light Tape®. 
The 83mm wide large size takes 1/2 (12.7mm) and 1 (25.4mm) lit width Light Tape®.

 



Applications
 


Single Colour
Single strips of Light Tape® from 1/4” (6mm) to 1” (25.4mm) can be used to great effect, creating floor displays that can be used again and again. 

Multiple Colours
The larger Floor Guard allows multiple strips of Light Tape® to be used creating stunning floor displays for stages, catwalks, trade shows and events.


Floor Branding
Promote your brand, message or URL using Light Tape® MicroBranding on the floor, walkways at your next event or trade show.


Light Tape® Floor Guard Colour Chart
 


Media White

Natural Blue

Blue Green


Rich Red

Extreme Green

Electric Blue


Classic Yellow

Extreme Orange

Classic Pink


Contact details:
 

 

Light Tape UK Limited
Tel: 44 (0) 8456 170 697

 



www.lighttape.co.uk

Share this email on Facebook

Share this email on Twitter


©2014 Light Tape UK Limited